Monday, January 28, 2008

Video... Ended with a crash...

It's been two weeks since i last flew, meanwhile i installed some nice carbon blades and tail, did some nice setup as well... So we've got a sunny Saturday, i took my girlfriend for a walk and decided to fly some rounds over a nearby soccer field... The rest is history... enjoy...

Friday, January 4, 2008

King 2 Pictures

Here are some pictures of my King 2 Heli, please click to enlarge...

   
   
  

Esky King 2 Videos

Here we go, this is a video of my HBK2:
http://www.youtube.com/watch?v=PGsoSs3JDOQ

 

http://www.youtube.com/watch?v=Jce9q1Fq0fA

 

It has the following add-ons:

- Esky 3800KV brushless motor and 25A ESC.
- Saehan 2100mAh 16C 3s1p LiPo Battery.
- Esky heading lock gyro.
- Aluminum rotor head and tail gear box.
- Carbon fiber paddles and tail blades.
- Tuning tail belt pulley with a greater diameter (Xtreme).
- Tuning titanium adjustable push rods (Xtreme).
- Self-made Battery monitor, separately monitors each of the lipo cells and triggrs 4 ultra bright LEDs on low voltage.
- Self-made LED position lights.

It seems that there is a full carbon version of the HBK2, however the carbon fiber frame is still not selling separately...

Thursday, September 6, 2007

Heli video :-)

Check out my heli on Youtube:

http://www.youtube.com/watch?v=_bnbA1VWEZQ&mode=user&search=

By the way, the E_Sky king is there, but more on that one later...

Tuesday, August 28, 2007

E_Sky HB King 2 coming soon!

Last week i have ordered an E_Sky Honey Bee King 2, RTF together with a brushless motor kit, heading lock gyro, 2 additional 1500 mAh lipos and some small stuff!

I bought it from Hong Kong at www.rc711.com, apparently the official dealer of E_Sky. The whole thing cost me only 244€, given that the RTF model is only 100€.

The bad news is that the package was apparently delivered to a Customs office, so i am preparing for a long wait... and for paying some 60€ of taxes :-(. lets see...

Noisy servos :(

I have found out the the E_Sky micro servos are the main source of radio interference... I have noticed this after replacing one failed servo, the radio glitches have decreased drastically. Note that the servo was working properly before it failed, but apparently causing severe interference.

Then i have connected an oscilloscope to the 5V BEC power supply and was not surprised to see huge (about 1V) ripples whenever one of the servos was operating. I solved this noisy power supply problem by using one ESC's BEC to feed the Receiver, Gyro and Y-Tail mixer, and the other ESC's BEC to feed the servos.

Now the newly (!) replaced servo is about to fail once again (shaking from time to time and apparently causing interference once again); so i have ordered a pair of other brand servos from HK. Let's see if they are better (link).

New ESCs arrived and installed

The new ESCs have arrived more than one week ago, but i've only now had time to blog about them.

So, i should say the the units are a bit bigger than the TowerPro MAG8, they also use the ATMEL Atmega 8 microcontroller, only that this one is in a bigger package.

The programming card is very handy, and it enabled me to change many settings, the most important are soft start, timing advance and PWM frequency; these settings were not available on the TowerPro.

I have made some thrust vs. current measurements, it was clear that the new controllers are way more efficient than the TowerPros, even when the timing andvance and PWM were not optimally set.

Speaking about settings, i found that middle timing and 16 kHz PWM frequency gave the best results with CD-ROM motors.

The main reason i bought new ESCs was the dynamic throttle limits of the TowerPro. These new ESCs also seem to have some kind of a dynamic throttle limit, but its effects are only noticeable when the throttle and rudder are set to maximum.

Another unpleasant behavior of the TowerPros is the tail shaking when the battery gets low, this was not noticed with the new ESCs.

Apart from installing new ESCs, one motor was completely replaced and the other one has got a new stator. Both motors were wound 13 turns in 0.45mm wire in a star configuration.

Flight times remained roughly the same though the handling got noticeably better. One way to make a significant improvement is to install an E_Sky heading lock gyro, i dont know if i would do that since i have already ordered a brand new E_Sky Honey Bee King 2!

Wednesday, August 1, 2007

New ESCs coming soon...

I am currently ordering some new brushless engine speed controllers over Ebay from Hong Kong. The cost only EUR 10,10 but seem to have more features than the TowerPro im currently used.

It's a 10A ESC branded Turborix (link), its most important feature is that it seems to have a fixed throttle range; in contrast to the TowerPro which sets its range automatically which is extremely inconvenient when running 2 ESCs in parallel. Another feature is the ability to set the timing advance.

I hope that i will get lucky this time and get a better overall performance...

Thursday, July 26, 2007

Fiberglass cabin pic



This is the Robins with its new fiberglass cabin, looks pretty cool :-). Notice the tidily rearranged electronics behind the removable windshield.

 

Wednesday, July 25, 2007

Fiberglass scale cabin from rc711.com

I've finally submitted my Masters thesis so now i have time to do some more blogging about my heli addiction...

After a very long wait i have finally got the fiberglass scale cabin i have ordered at rc711.com (this link). It is exceptionally well made and features a removable windshield attached with 4 screws to the front of the body.

The cabin needs some rework in order to fit on the landing skid. In particular, the slits that accommodate the skid have to be cut-out manually. Make sure you wear proper breathing protection when cutting fiberglass with a power tool (which i regret not to have done :|).

This cabin weights around 30 grams and is more than 10 grams heavier than the original one which resulted in a 1 min shorter flight time. Surprisingly though, the additional weight of the canopy greatly improved the flight stability of the helicopter.

The heli has now a much more professional look. I will post a picture asap.

Tuesday, July 3, 2007

Schnurzz...

This is what the motor assembly looks like, it fits in place of the original 180-size motor.

With the rotor removed, note that a 3mm brass tube was used as a shaft. The tube had to be sanded prior to fitting it into the bearings. This shaft is lighter than the original shaft and is directly soldered to the rotor can. When soldering the shaft, care must be taken not to overheat the neodym magnets which are rated to withstand a maximum of 80°C.


The motor base was constructed from a tube cut out of a ball pen's body and a piece of PCB glued together using UHU Endfest 300 super strong epoxy glue. The stator is held in place inside the tube with a couple of drops of 5 minutes epoxy.
Fixing screws are directly dirven into 1.5mm holes in the PCB (same type of screws is used for holding the blade holders together).
The motor was wound with a 0.4mm cooper wire, 14 windings per tooth in a star configuration. This winding works well with a 12 tooth pinion. A plastic pinion runs quieter than the metal one.

More photos...

Another view from the underside of the frame, one can clearly see the plastic gears and the rubber battery holder.

Another perspective, shows the receiver (left), the low-battery alarm (middle) and the V-Mixer (right). The antenna can also be seen, it is wound on a 2mm carbon-fiber rod.

And from one more perspective...

Photos

Due to a significant interest that was shown from a couple of members of www.rclineforum.de i have have taken the heli apart and took some pics. Have fun!


This is my R22, you can see lots of this fiber-glass reinforced tape all over its body. The scale cabin is actulally assembled like a puzzle and held together from its inside by a layer of tape.

This is the main frame seen from behind, you can see the Schnurzz brushless motor mounted an a custom-made socket. The frame was extensively cut-out to accomodate the rotor.

Another view of the main frame...

View showing the PG-03 gyro board covered with shrink tube (right) and the stack of ESCs and V-Tail mixer (left).

Monday, July 2, 2007

Welcome to my new Blog

This is a blog I've just created to document my RC-Helicopter hobby.

I started this hobby in December 2006 when i bought myself for Christmas an E-Sky Robins R22, which is the popular E-Sky Lama V3 helicopter dressed in a scale cabin of something that resembles a Robinson R22. Not a very accurate representation but looks nice and is quite crash-resistant.

Since I've been flying and tuning this nice little heli, for quite some time, so i thought it would be a good idea to document everything in a blog.

Things that I've done so far:

  • Original battery holder replaced by a combination of an elastic band and two carbon-fiber sticks - Robins accepts all kinds of LiPos.
  • Tuning aluminum rotor head and swash plate.
  • Carbon-fiber outer shaft, 1 cm longer than the original - lighter and helps reducing rotor blade clashes.
  • Shorter flybar with adjustable weights - greatly improved maneuverability.
  • Modified stock transmitter to give longer servo displacement - greatly increased fast-forward flight (FFF) speed.
  • Upgrade to self made CD-ROM brushless motors (!):
    • Stock ESC/gyro board was replaced by standard components including 2 Tower PRO 12A ESCs, a PG-03 micro gyro and a V-tail mixer.
    • Yaw control on the transmitter was adjusted to work with the gyro, a separate potentiometer was added for yaw trim.
    • Total cost:
      • Motors: 2 x 15€
      • ESCs: 2 x 20€
      • Gyro: 30€ from Hong Kong
      • V-Mixer: 10€ from Hong Kong
      • Gear set: 5€
      • Sums up to 115€ plus small stuff (wires, 2mm gold contacs, shrink tube, etc..)
  • Installed a self-made LED low-battery alarm, with adjustable threshold voltage.
  • Replaced low current stock BEC with connector 2mm gold contacts with plastic holders - improved flight time.
  • Laminated rotor blades and inside of cabin with glass-fiber enforced adhesive tape (www.cnc-modellsport.de) - greatly improved overall robustness.
After all the modifications, the indoor slow-flying beginner helicopter turned into a powerful fixed-pitch heli that can handle moderate winds, capable of FFF and flies more like a single-rotor heli.

Flight time was increased from 8 min with stock motors to more than 13 min (until LiPo alarm goes off at 6.3V).

Currently I am short of time because busy finishing my Masters thesis. However I will provide you with some more detailed explanations including photos and plans.

My next project will be an E-Sky Belt CP which i will buy as soon as i will have enough free time.

Don't hesitate to put your comments and ask questions!

Regards,
Prince